Sunday we were up and off to the little International Bible Church, which meets in a local school. The building is quite ordinary for this climate. All ceramic tile floors and a tin roof. The windows are louvered glass panes, a number are missing and there are no screens. In the foyer of the school, the roof is elevated and open around the sides. The bathrooms are in this area as well as some offices. On Sunday morning, we have tea, coffee, juice and cookies in this big area.

They have a very nice keyboard and an accomplished pianist to play it. She played her own arrangement for the offering. It was very nice. Last week we had guitars, but this week they were missing. We sang the old fashioned way, from the hymnal. The chairs are chairs that the people have purchased or just brought from home. All the chairs there were filled. I think I heard them say that they have around 40 attenders. Not sure how many members. It varies some because of the tourists.

During the service we had the pleasure of the usual little mourning dove walking through, looking for crumbs. This Sunday, we had a little extra entertainment as a large iguana decided to jump from a nearby tree onto the roof. Now keep in mind that it is only a tin roof. What a noise, as that iguana landed and then slithered down the slope of the roof. Not sure if he stayed on the roof or slid completely off, but he did cause a stir. Even the locals were snickering! It was very noisy! There was also the loud trill of a tree frog off and on during the service. Sounded similar to the cicadas in Indiana.

For lunch we ate at a little restaurant by the sea that we used to frequent in the ‘old days’. Quite disappointing. Of course it had changed hands and the food offerings were quite different. No local food at all. Very unremarkable in flavor or offerings, except possibly for conch fritters. We were eating there for our anniversary dinner. I hope Larry takes pity on me and we go to a better place for our anniversary :-).

The afternoon was just a lazy Sunday afternoon. Naps, and a little reading and puttering. Later we went to the transmitter site to watch the transmitter go on the air, so Larry could take readings. Then home for our usual swim.

We slept in late this morning — must have needed it. The heat seems to have a draining effect on those of us not used to it. The typical high is about 87F and low is 80F, but the last few days that has been more like 95F and 89F respectively. Forecast for next week is supposed to be more normal.

In an email yesterday we learned that the 50,000-watt AM transmitter for Swaziland is supposed to be packed into its container on Monday 18 Oct 2010 at 9am. Pray that it can be loaded and secured in the allotted 2 hours before charges begin for extra hours. Also pray that it will be able to make the ship departing for Africa on 23 Oct.

The transmitter ‘called’ me at 9am this morning, which seemed strange since it was not supposed to be on the air at that time. Joe Barker then called to say that he had changed the settings so the transmitter called in the morning about cutbacks in power rather than interrupting sleep. Of course, if the transmitter was off the air, it would still call. Virginia and I went to the site to check the events log to see exactly what had happened. Found that there had been several cutbacks, but in each case the transmitter returned to full power within minutes. The listeners would have hardly noticed. If would be good if the system could be programmed to call if the transmitter did not return to full power within a certain amount of time. I will need to investigate whether that is an option with this monitoring system.

While at the site I continued to disassemble the PA Module to get to the faulty parts. I think everything is accessible now, but I need to grind down the outside diameter of a 5mm socket to less than 7mm. Fortunately there is a small lathe at the site, if it can be made operable.

From the site we came home for an early lunch, then filled up the car with gas at about $4.60 per gallon to do some sight seeing. Today we went to Lac Cai (Lac Bay) on the east (windward) side of Bonaire. Lac Cai is a shallow bay that is very calm in spite of being being on side of the island with larger breaking waves. I estimate the bay is about 10 feet deep in the deepest parts and one can see all the way to the bottom every where. There also seems to be more sand there than any place we have seen so far. This bay is famous for all the conch, and their shells. They are protected now but 40 years ago I would go diving for conch and brought home a couple of really pretty shells. The huge piles of conch shells that were let after the conch were harvested to eat are still there after 40 years, but are all bleached white and crumbling.

On the way back home we passed a wind turbine, one of more than a dozen large ones on Bonaire. We are rather amazed how quiet it was while standing under it, but it may have been louder with faster winds.

Back in town, we decided to do some shopping at Cultimara, where it is possible to select fruits and vegetables (not prepackaged) and sort out the bad ones. We then shopped at Warehouse Bonaire Supermarket. Stores are now open on Saturday afternoons. Will need to check tomorrow to see if some are open on Sundays.

Again we were able to have our regular half hour plus swim at sunset. This evening was amazing! Exactly as the sun set, there was a boat in the distance that completely fit into the circle of the orange setting sun. Unfortunately we did not have our camera with us. Even if we did have, we probably could not have gotten out of the water fast enough to get it.

NOTE — To see a bigger (and in some cases, expanded) version of any of the photos in this blog, just double click on the one you want to see.

The first thing that happened this morning occurred about 1am when the transmitter ‘called’ me that an ‘event’ had occurred. Since I could still hear it broadcasting I decided that it must have cutback on power due to arcing on the antenna arc gaps. I dialed in the code to return it to full power, but could not verify that it had happened. In the morning and at the office, we were able to download the logs and found that a cutback had taken place at that time and that full power was restored shortly thereafter. So did it do it itself or was it my phone call? Don’t know for sure.

After devotions this morning, I went with Ivan, a Bonairean worker, to the site and using a four wheel drive vehicle drove to each of the four towers to clean and paint with black paint the four arc gaps to see if it helps reduce the number of bugs from swarming around them. While there I noticed that there were thousands of little bugs flying around the white walls of the antenna hut next to the tower. I am wondering if the wall next to the tower was painted a darker color whether that also might help. The bugs would hopefully then be attracted away from the tower to the other white walls and roof. Might be worth a try?!

Just thinking — the arc gaps are usually brass and set a specific distance apart to arc over at a voltage just higher than normal operating voltage. I would think that painting the gap would provide a layer of ‘insulation’ on both sides of the gap and effectively increase the arc over voltage. By how much, I do not know, but something to consider!

We had an unusual opportunity in the afternoon. Amado and Sue Felix own Achie-Tours and provide tours especially for the cruise ships that stop in Bonaire. Yesterday Sue called Virginia and said that they had a couple of vacant seats on one of there better tours and asked if we would like to go. So from about noon we went on a three plus hour tour. It was very nice. Amado worked for TWR back in about 1967 and Sue came from the U.S. to help TWR short term the summer of 1969, while Larry was also serving his second short term stint on Bonaire. Amado and Sue were married in 1971 and are heavily involved in many business ventures on Bonaire. They have been a big help to TWR all through the years.

Our swim this evening was very short, as there was a huge crowd at the beach and lots of partying. Privacy was none existent and we did not feel that it was prudent to leave our belongings out of our reach (although the things of value, a cell phone and our keys were hidden from view). Especially while the transmitter is on the air from 5:30 pm to 8:30, I must be available to receive and act on any call to the cell phone from the transmitter.

After several late evenings, we turned in early.

During devotions this morning the FM transmitter went off the air. It was quickly determined that the cause was a power failure and, with no backup power, it did not return until after lunch. This is a small 600-watt transmitter broadcasting to the people of Bonaire.

We reviewed the 100,000-watt AM transmitter log and found that power was reduced at 9pm last night and continued at that lower level most of the night. Rich West called me via the internet from Elkhart to suggest that this was likely caused by water bugs flying through the arc gaps of the towers, causing a flash over, then the transmitter sensing a problem and reducing power to prevent further arcing. Water bugs are around because of standing water due to unusually heavy rains a couple of weeks ago. Rich says this problem will go away as the water slowly dries up. Which it is! Rich then noted that after the ground dries up termites start coming out of the ground about 9am. He also noted that by painting the arc gaps a dark color rather than white, like they were initially, that the frequency of arcs was reduced. I wonder if some type of screen could be used around the gap to prevent this, but this screen would have to be insulation material that can handle the high voltage! With Virginia’s experience with salty dust coating the windows screens, that may not be such a good idea!

The automation system has now been programmed to give me a call when the transmitter reduces power so we will be more aware of what is happening, and maybe find a solution. Joe Barker also tried to set up a laptop computer so that I could increase the power back to normal from home when this happens. Unfortunately, it did not work from the place where we are staying, so we’ll have to think about this some more. Transmitter control can be done via my cell phone, but it is very cumbersome and I can not verify whether corrective action has actually taken place.

The above efforts took a considerable amount of time so I only got to the site about 3pm. Picked up on the spare PA Module repair that was started yesterday. Managed to locate most of the spare parts, needed to make the repairs, including one spare fuse, which had a different number than the manual specified. Also gained access to all the faulty parts in the module after taking out lots of screws. Now to remove the faulty parts from the circuit boards. I’ll need to get the soldering station from town. Also need a thin wall 5mm socket or nut driver with a maximum outside diameter of 7mm. Can find nothing at the site or in town with thin enough wall. May have to get a socket and grind it down on the lathe.

Hopefully there will be more obvious progress tomorrow.

Another thing I discovered this morning is that the odd fuse that was blown in the PA module is only rated at 150 vdc rather than 500 vdc like the other proper ones. This could have been the cause of added damage with the initial failure. The one I discovered this afternoon in stock is a Ferraz Shawmut A5Y20-2 which is a direct replacement for the Buss Limitron KLM-20 fuse(s) that are needed.

This evening, we learned that plans to pack the 50,000-watt AM transmitter tomorrow morning in Elkhart has been delayed due to the shipping company’s inability to determine whether it will be able to connect with the ship leaving for Africa on October 23 and arriving there on December 5. TWR Swaziland would prefer it not get held up and incur storage fees should it arrive during the long holiday breaks by customs and others over Christmas and New Years.

NOTE — To see a bigger (and in some cases, expanded) version of any of the photos in this blog, just double click on the one you want to see.

Today I thought that you might like to take a tour through our home. It is quite average and nothing too impressive. The most interesting part is probably the bathroom. The tank for the toilet is up high and one has to push a button to make it flush.. sometimes it needs pushed more than once before it decides to flush! Also you can see that we have only a shower. It has a faucet down low for filling buckets for mopping, washing sandy feet, etc. All the faucets have one temperature of water and that is a cool warm. It feels cold first thing in the morning. Invigorating!!

All the rooms have nice big ceiling fans like the one in our bedroom. We have one dresser (that’s all we need for 6 weeks), a bed with only a sheet for cover (that’s plenty in this heat!), and up by the ceiling is an airconditioner we use at night. I took a picture of the front and back because it is a little different than an American air-co.
Our dining room is sufficient as is the living room. Notice the louvered windows and tile floors everywhere.

The kitchen holds a rusty refrigerator, that looks better on the inside than the outside. We have a microwave that does what it needs and a toaster oven that I have not tried out yet as well as a gas stove. The burners on the stove work, but I haven’t used the oven. Probably won’t unless it is necessary.

The laundry room is off the kitchen and through the carport. It has a hot water heater that is not working, a dryer that is not working and nice new washing machine that works very well.

In the backyard is the solar dryer. I had clothes on the line yesterday, but not when I took the picture.

And this is the car we drive. So far so good. I have not killed it yet, but am waiting to do so. It has been a long time since I have driven a stick shift.

Tomorrow, I will try to take a walk through town and put up pictures of that. I am sure you will be interested to see a picture of a ‘dremple’.

NOTE — To see a bigger (and in some cases, expanded) version of any of the photos in this blog, just double click on the one you want to see.

Added note — The house that we are living in has three bedrooms.