{"id":2637,"date":"2018-01-20T22:20:40","date_gmt":"2018-01-21T03:20:40","guid":{"rendered":"https:\/\/mcguirereport.mcguireclan.org\/?p=2637"},"modified":"2018-01-20T22:20:40","modified_gmt":"2018-01-21T03:20:40","slug":"twr-bonaire-2018-january-19-friday","status":"publish","type":"post","link":"https:\/\/mcguirereport.mcguireclan.org\/?p=2637","title":{"rendered":"TWR Bonaire \u2014 2018 January 19 Friday"},"content":{"rendered":"

My first project was to install circuit breaker protection on the primary of emergency buttons’ step-down transformer mentioned in an earlier blog.\u00a0 We also discussed having a small light at the emergency button to indicate that the circuit is active.<\/p>\n

Meanwhile, Daryl, Jonas and others were bringing up the dummy load to begin further testing of the new transmitter.\u00a0 Unfortunately, its 50-amp circuit breaker kept tripping.\u00a0\u00a0 It was discovered that while the four fan motors only draw 26 total amps when running, the inrush of current for starting all four motors at once is close to 150 amps.\u00a0 As a ‘temporary’ solution the 50-amp breaker was replaced with a 100-amp breaker and the cooling fans for the dummy load came on without tripping the 100-amp breaker.<\/p>\n

\"\"<\/a>

The dummy load working, as evidenced by the louvers which are opened by the high air flow. This Kintronic Labs load can dissipate over 600,000 watts of power.<\/p><\/div>\n

I began to research possible solutions to this breaker tripping and emailed Ralph VanDerWerf for his advice.\u00a0 After several proposals were bantered back and forth, it was eventually determined that the electrical code would allow the use of the 100-amp breaker for these starting motors under such circumstances.<\/p>\n

Tom and Joshua used my assistance to do some more antenna adjustments at the towers.\u00a0 Upon\u00a0 instruction via the two-way radios, I would switch on, or off, the transmitter (at the reduced power level of 5,000 watts) to allow them to safely make measurements with their operating impedance bridges.<\/p>\n

\"\"<\/a>

Jonas (on phone) and Dave noting that the output power of the new transmitter is at 100kw.<\/p><\/div>\n

This afternoon we began the process of testing the new transmitter’s ability to produce power for broadcasting.\u00a0 To do this we used the dummy, or test, load.\u00a0 While in phone contact with Nautel this process was begun.<\/p>\n

\"\"<\/a>

Output power now at 200,000 watts!<\/p><\/div>\n

The transmitter power easily continued to increase until 270 kw when it recycled due to a ‘Fast SWR Shutback’.\u00a0 Since we were on the dummy load, we suspected possible arcing there.\u00a0 Upon close examination, I discovered something that looked like a piece of paper wrapped around a resistor support inside the dummy load.\u00a0 After opening a side panel of the dummy load a strip of foil covered plastic was removed.\u00a0 We were sure this would take care of the problem, but after powering back up, the transmitter again tripped at the same 270 kw power level!<\/p>\n

By now Tom and Joshua were finished with antenna adjustments for the day, do it was decided to power up into the antenna instead.\u00a0 Same problem at 270 kw on all three antenna patterns!\u00a0 This seemed to indicate that the problem was in the antenna\/dummy load switch box, or the coax from the transmitter to this box–the only things used in common for carrying power to the dummy load, or to the antenna system.\u00a0 Tom thoroughly checked the witch and filed off a couple of sharp corners.\u00a0 The problem remained.\u00a0 Next the coax line was removed from above the transmitter, thoroughly cleaned and checked, then reinstalled.\u00a0 Still the same problem at exactly 270 kw every time.<\/p>\n

\"\"<\/a>

Jonas, Joshua and Kevin reinstalling coax above transmitter.<\/p><\/div>\n

It was getting late!\u00a0 The old transmitter was switched on for the evening broadcasts and we held a short prayer meeting for wisdom.\u00a0 We would appreciate your prayers regarding this challenge!!<\/strong><\/em><\/p>\n

As we arrived home around 7pm, Virginia took a dish of\u00a0 chicken and rice to Tom and Joshua for their evening meal.\u00a0 Our supper was some of the same, with salad.<\/p>\n

After supper, I continued trying to catch up on overdue blog entries.\u00a0 Late to bed again!!<\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

My first project was to install circuit breaker protection on the primary of emergency buttons’ step-down transformer mentioned in an earlier blog.\u00a0 We also discussed having a small light at the emergency button to indicate that the circuit is active. Meanwhile, Daryl, Jonas and others were bringing up the dummy load to begin further testing […]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_s2mail":"yes","footnotes":""},"categories":[20],"tags":[],"class_list":["post-2637","post","type-post","status-publish","format-standard","hentry","category-bonaire-2018"],"_links":{"self":[{"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=\/wp\/v2\/posts\/2637","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=2637"}],"version-history":[{"count":3,"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=\/wp\/v2\/posts\/2637\/revisions"}],"predecessor-version":[{"id":2651,"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=\/wp\/v2\/posts\/2637\/revisions\/2651"}],"wp:attachment":[{"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=2637"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=2637"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mcguirereport.mcguireclan.org\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=2637"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}